Metal detector Quest X10

Quest X10 is an ultra-light and fully waterproof metal detector equipped with an elliptical TurboD Blade Raptor coil with a sensitivity of 12 kHz VLF, LCD display, four search modes, and automatic/manual ground balance.

The lightweight design with a weight of 945 g makes it an ideal detector for long searches on land or underwater. You will appreciate the collapsible design for transport and storage. Special attention is deserved by the high IP68 protection rating, thanks to which you can use the detector underwater up to a depth of 3 m.

The operating interface offers 4 search modes (all metals, jewellery, coins, custom with pinpoint), a function for precise target location PinPoint, and also automatic/manual ground balance.

All important parameters are displayed on the easy-to-read LCD display with a diagonal of 3", including target depth, a two-digit target ID (99), the currently used mode, and battery charge level.

This model uses a TurboD Blade 9×5" coil with a long detection range. The coil is filled with material using FloatResin technology to ensure higher durability, low weight, and faster response.

The detection signal transmitted while scanning the ground can be listened to via the built-in speaker, or if you do not want to attract attention, simply connect headphones using the 3.5 mm jack socket.

A very practical component is the LED diode, which effectively illuminates the working area. Power for the electronics is provided by a built-in Li-Po battery with a capacity of 1000 mAh and charging via a USB cable (included).