Trail Camera Bunaty Wide Full HD without GSM

The Bunaty Full HD trail camera can illuminate at night under ideal conditions using an invisible (IR) flash with a range of 15 metres. Photos are captured at a maximum resolution of up to 12 MPx and video in Full HD. The trail camera saves data (photo and video) to an SD card with a maximum capacity of 32 GB. Once the maximum capacity of the inserted SD card is reached, the camera will either stop recording, or it will overwrite old recordings. Thanks to the wide-angle sensor it is especially suitable for shorter distances, where it covers a larger area than standard trail cameras.

The trail camera is powered by eight AA batteries (8xAA). You can also power it from an external source. The input for the external connector is located on the bottom part of the camera. Many competitors illogically have the connector on the top, which very often leads to moisture getting into the electronics. The camera can be switched to three different modes: off, on and test. The first two are obvious — camera off and camera on. In test mode you set everything according to your requirements. Another advantage is the 3D camouflage and the minimum of glossy surfaces, which makes the camera easy to hide.

The biggest advantage of this trail camera is the relatively large colour LCD display and six clearly marked buttons which are located inside the metal protective housing. These two elements significantly simplify the setup of the various functions of the camera. Another major plus is the clear Czech menu. The LCD display is also a great help when positioning the camera itself. You do not have to wait a long time for the first picture just to find out you managed to capture only the thief’s legs. You will see the final field of view immediately after switching to the on mode. For 45 seconds the display shows exactly what the lens is capturing. During this time you must place the camera.

In the menu you can set quite a large number of different functions. The camera can take one, two or up to three shots in quick succession. You can also set the length of the recorded video from a few seconds up to ten minutes. Keep in mind that the longer the video, the more space it will take up on the SD card. Unlike some competing models, you can record video also with sound. If you go through the menu carefully, you will find that you can also set the motion sensor sensitivity and the IR illumination level.

Worth mentioning is especially the recording interval, i.e. the time between individual shots. If you set five minutes and the sensor detects movement for 14 minutes, it will take three photos. The camera can also be used for time‑lapse. Alternatively, you can set it to be active only at night. You can even password-protect the camera to prevent unauthorised access.

Main advantages

 — large and clear LCD display

 — Czech manual and menu

 — simple and easy-to-understand setup of the trail camera

 — wide range of functions and settings

 — option of power supply from an external source