The PCP air rifle Zbroia Sapsan TAC-M uses a compact bullpup design with the action and magazine positioned behind the trigger. It is built around a robust anodised aluminium chassis, a regulated PCP system with an aluminium air cylinder and modular mounting interfaces for optics and other accessories.
Regulated PCP system
Compressed air is supplied by an aluminium air cylinder with a maximum filling pressure of 300 bar. The air system is equipped with a regulator, and the cylinder pressure can be monitored using the pressure gauge located on the left-hand side of the air rifle.
Filling is carried out using a filling probe with a quick connector. On this model, you need to fold the trigger guard downwards to expose the filling probe port.
The Sapsan TAC-M is manufactured in two basic configurations, which differ in barrel length and air cylinder capacity:
Barrel and reloading
The steel rifled barrel with 12 grooves is fitted with a barrel sleeve, also known as a shroud. The muzzle features a 1/2 UNF thread for fitting an external moderator.
Due to the limited clearance between the barrel axis and the air cylinder, a moderator with a maximum diameter of 28 mm can be used. A larger-diameter moderator can only be used if its rear section near the thread is sufficiently tapered and does not interfere with the air cylinder.
The magazine is inserted into the rear of the action behind the trigger. A holder for one spare magazine is also integrated into the rear of the stock.
Bullpup design and ergonomics
Moving a substantial part of the action behind the trigger allows a long barrel to be retained within a compact bullpup design and also shifts the centre of gravity closer to the shooter.
The Sapsan TAC-M uses an adjustable two-stage trigger. The manual safety is located immediately in front of the trigger.
The upper section of the stock features a fixed cheek rest made of stitched synthetic leather. The butt pad is height-adjustable using a simple mechanism – simply pull it outwards slightly and then slide it to the desired height.
Picatinny and M-LOK
For mounting a riflescope, there is a top Picatinny rail. Two additional short Picatinny rails are located on either side of the barrel, allowing further accessories to be fitted.
The aluminium platform surrounding the air cylinder features M-LOK slots on the sides, underneath and at the lower angled positions. A removable Picatinny rail is factory-fitted to the bottom M-LOK slots.